Dewalt Power-Stud SD6 Wedge Expansion Anchor Spec Sheet
This Power-Stud+ SD6 Wedge Expansion Anchor is a fully threaded, torque-controlled, stainless steel wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete.
Features and Benefits
- Knurled mandrel design provides consistent performance in cracked concrete and helps prevent galling during service life.
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard clearance fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
- Corrosion resistant stainless steel body and expansion clip
- Nut and washer are included
General Applications
- Structural connections, i.e., beam and column anchorage
- Safety-related and common attachments
- Interior and exterior applications
- Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
Approvals
- International Code Council Evaluation Service (ICC-ES), ESR-2502 for cracked and uncracked concrete [2015 IBC, 2015 IRC, 2012 IBC & IRC, 2009 IBC & IRC, and 2006 IBC & IRC]
- Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318 (Strength Design method using Appendix D)
- Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
Suitable Base Materials
- Normal-weight concrete
- Structural sand-lightweight
- Grouted Concrete Masonry (CMU)
