Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Style C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back. Style D features a lockout type with locknut. Material: Indexing pin hardened, threaded sleeve 1.4305, indexing pin 1.4034, mushroom knob black grey thermoplastic.
![Kipp 3/8"-24 Indexing Plunger with Grooved Pull Knob, Stainless Steel, Locking Pin Not Hardened - Style A (Qty. 1), K0339.11105AL Kipp 3/8"-24 Indexing Plunger with Grooved Pull Knob, Stainless Steel, Locking Pin Not Hardened - Style A (Qty. 1), K0339.11105AL](https://cdn11.bigcommerce.com/s-gdy1ehz/images/stencil/500x659/products/124727/158409/GrooveA__01336.1436388029.jpg?c=2)