Dewalt Hangermate Internally Threaded Rod Hanging Anchors Spec Sheet
The Hangermate®+ concrete screw is a one piece, steel anchor designed for rod hanging applications such as fire protection systems, ventilation systems, electrical conduit, pipe hanging and cable trays. Tested and qualified for use in cracked concrete and seismic conditions. The concrete Hangermate®+ requires ANSI masonry bits for installation, accepts 1/4", 3/8" or 1/2" diameter threaded rods. It is also available in a 3/8" male thread version.
General Applications And Uses
- Fire Sprinkler Pipes
- Ventilation Systems
- Cable Trays
- Lighting Systems
- Suspended Ceilings
- Overhead Utilities
- Tension zone / cracked concrete
- Seismic qualification (SDC A – F)
Features And Benefits
- Installs into holes drilled with a standard ANSI drill bit
- Fast installation with power tools resulting in labor savings
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
Approvals And Listings
- International Code Council, Evaluation Service (ICC-ES), ESR-3889 for concrete; code compliant with the International Building Code/International Residential Code: 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC and 2012 IBC/IRC.
- Tested in accordance with ACI 355.2/ASTM E488 and ICC-ES AC193 for use in cracked and uncracked concrete and for use with the design provisions of ACI 318 (-19 and -14) Chapter 17 or ACI 318-11 Appendix D.
- Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (anchor category 1)Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement.FM Approvals (Factory Mutual) - see approval for sizes.
- City of Los Angeles, LABC Supplement (within ESR-3889)
- Florida Building Code, FBC Supplement including HVHZ (within ESR-3889)
