| L-Shaped Anchor Bolts | ||||||
|---|---|---|---|---|---|---|
|
Nominal Size x Length Click on Size |
Inside Length (B). (Below the Bend) |
Inside Width (B) | Threaded Length (T) | |||
| Max | Min | Max | Min | Max | Min | |
| 3/8-16 x 8 | 8.125 | 7.875 | 1.125 | .875 | 1.625 | 1.375 |
| 3/8-16 x 10 | 10.125 | 9.875 | 1.125 | .875 | 1.625 | 1.375 |
| 1/2-13 x 8 | 8.125 | 7.875 | 1.125 | .875 | 2.125 | 1.875 |
| 1/2-13 x 10 | 10.125 | 9.875 | 1.125 | .875 | 2.125 | 1.875 |
| 1/2-13 x 18 | 18.125 | 17.875 | 1.125 | .875 | 2.125 | 1.875 |
| 3/4-10 x 12 | 12.188 | 11.812 | 3.188 | 2.812 | 4.250 | 3.750 |
| 3/4-10 x 18 | 18.188 | 17.812 | 3.188 | 2.812 | 4.250 | 3.750 |
* Click on the nominal size to find products.
| L-Shaped Anchor Bolts: Performance & Mechanical Stats | ||
|---|---|---|
| Description |
A headless fastener with a partially threaded shank. A portion of the top un-threaded section of the bolt is bent at 90-degree angle. It is recommended that bolts be supplied with (a) nuts that conform to ASTM A194 or A563 Grade-A (hex or heavy hex); and (b) washers that conform to ASTM F436 Type 1. |
|
| Applications |
Designed to anchor structural supports to concrete foundations. The bent portion (or leg) of the bolt is that which is embedded into concrete to create greater resistance to forces pulling away from the concrete foundation. |
|
| Material |
Grade-36: Low carbon steel shall conform as follows: Carbon: 0.29% max; Manganese: (optional); Phosphorus: 0.05% max; Sulfur: 0.06% max; Copper (when specified): 0.18% min. |
|
| Tensile Strength |
36,000 psi., minimum |
|
| Plating | Anchor Bolts are usually supplied plain. | |