Magni has been providing world-class corrosion protection chemistry for customers in all industries since 1974. Magni research and development works closely with OEMs, suppliers, and applicators to engineer custom coating solutions using zinc flake technology to extend the service life of their products.
Magni coating technologies are specified by most major automotive OEMs throughout agricultural, energy, construction, industrial, marine, and military industries. All of Magni's technologies are chrome-free and meet the most stringent performance and regulatory requirements.
Magni Product Lines
Brake System Coatings - 100 Series
Magni 109 - Brake Rotor Coating
Magni 109 is a high-performance chrome-free coating – engineered for use on brake rotors – that provides sacrificial coating protection and will not spall on the braking surface. This inorganic, metallic film contains proven corrosion inhibitors and is applied in a single thin layer to protect against under-vehicle corrosion. Because its frictional output is similar to a bare rotor, Magni 109 can be applied to all braking surfaces.
Magni 111 - Brake Rotor & Drum Coating
Magni 111 is a chrome-free, black coating engineered for use on brake rotors and drums. This waterborne coating incorporates proprietary, inorganic pigments and other corrosion inhibitors, and provides good corrosion and heat resistance. Magni 111 is typically applied to a clean, dry component. Application is followed by a brief low-temperature cure or air dry.
Magni 112 - Brake Rotor & Drum Coating
Magni 112 is a chrome-free, water-reducible coating engineered for use on brake rotors and drums, and to meet the Honda HES specification. This single-coat system is black in color and is applied to clean, dry surfaces. Magni 112 is cured at 250° F and coated parts can be handled immediately after application. It is applied via spray methods.
Magni 118 - Brake Caliper Coating
Magni 118 is a chrome-free coating engineered for use on brake system components such as calipers. It contains an aluminum-pigmented organic topcoat applied over zinc plating. In addition to providing exceptional galvanic corrosion protection against aluminum and other metals, Magni 118 is available in a variety of colors. It is resistant to electrolytic and chemical perforation from automotive fuels and fluids. It is applied as a thin film that allows thorough and consistent coverage of complex shapes.
Magni 130 - Brake Rotor & Drum Coating
Magni 130 is a chrome-free, water-reducible coating engineered for use on brake rotors and drums. This coating is black in color and is applied to clean, dry surfaces. Magni 130 is a durable coating cured at 200° C and can be handled immediately after application.
Magni 140 - Brake Rotor Coating
Magni 140 is a high-performance, chrome-free coating engineered for use on brake rotors. This inorganic, metallic film contains proven corrosion inhibitors and is applied in a single layer to protect against under-vehicle corrosion. Since Magni 140’s frictional output is similar to a bare rotor, it can be applied to all braking surfaces. Overspray is also permissible to eliminate the need for masking and reduce application costs.
Magni 190 - Brake Rotor & Drum Coating
Magni 190 is a high-performance, chrome-free coating – engineered for use on brake rotors and drums – that can be applied on as-cast or machined surfaces. The bright silver appearance provides a refined, premium appearance. This inorganic, metallic film contains proven corrosion inhibitors and lamellar pigments, and offers exceptional cathodic protection in a single thin layer
Muffler, Underbody & Chassis Coatings - 200 Series
Magni 234 - Muffler, Resonator & Tailpipe Coating
Magni 234 is a chrome-free coating engineered for use on stainless and aluminized stainless steels and is typically applied to fabricated mufflers, resonators and tailpipes. It offers exceptional corrosion resistance, is applied to clean, dry surfaces and is oven cured.
Magni 235 - Muffler, Resonator, Tailpipe, Exhaust Bezel & Diesel Engine ATD Coating
Magni 235 is a chrome-free coating engineered for use on uncoated steel, aluminized stainless steel and cast iron materials. This coating offers exceptional corrosion resistance and withstands temperatures of up to 500° C; it is typically applied to fabricated mufflers, resonators, tailpipes, exhaust bezels and diesel engine after-treatment devices (ATDs).
Magni 236 - Muffler, Resonator, Tailpipe, Exhaust Bezel & Diesel Engine ATD Coating
Magni 236 is a hex-chrome free coating engineered for use on uncoated steel. aluminized stainless steel and cast iron materials. Offering exceptional corrosion resistance, Magni 236 is often applied to fabricated mufflers, resonators, tailpipes, exhaust bezels and diesel engine after-treatment devices (ATDs); this coating withstands temperatures of up to 600° C.
Magni 265 - Underbody Stamping & Structural Component Coating
Magni 265 is a chrome-free duplex coating engineered for use on vehicle stampings and other structural components. Combining an inorganic zincrich basecoat with a high-performance organic topcoat, Magni 265 delivers exceptional corrosion protection on the interior and exterior of these structural components. Since it is applied after fabrication, Magni 265 provides excellent corrosion protection at the weld and heat affect area. Unlike conventional e-coat, Magni 265 will provide extended field protection, often allowing for use of thinner-gauge steel and lighter-weight components.
Magni 295 - Chassis & Structural Component Coating
Magni 295 is a chrome-free, corrosion-resistant coating engineered for use on uncoated low-carbon steels; uncoated thin-gauge, high-strength steels; and uncoated ultra-high-strength steel components prior to application of electrodeposition coatings. This coating is typically applied to chassis and structural components and assemblies, stampings and other products requiring corrosion protection beyond standard e-coating.
Fuel Tank Coatings - 300 Series
Magni 336 - Fuel Tank Coating
Magni 336 is a chrome-free, highly conductive thermoset aluminum-rich coating engineered for use on automotive fuel tanks. A coil-coated barrier topcoat on both sides of zinc-nickel and galvanneal coated sheet steel, Magni 336 provides a level of fuel resistance that accommodates all OEM fuel blends, including flex fuels, and is highly corrosion and chip resistant.
Fastener, Clamp & Stamping Coatings - 500 Series
Magni 501 - Fastener Coating
Magni 501 is a globally available chrome-free, inorganic zinc-rich corrosion protection coating engineered for use on fasteners and other metal components. An ideal replacement coating for zinc plating and trivalent passivation, Magni 501 is applied as a thin, paintable coat that provides exceptional corrosion protection in a single layer. The result is superior performance compared to conventional zinc plating.
Magni 504 - Fastener Coating
Magni 504 is a chrome-free, water-based coating engineered for use on stainless steel. Typical applications include nuts, bolts, screws and clamps. This coating features an inorganic/organic hybrid resin system that withstands automotive fluid resistance requirements and should be applied to thread-forming fasteners and other fasteners that require high lubricity. Magni 504 is often used on stainless steel fasteners to prevent galling during assembly.
Magni 510 - Fastener Coating
Magni 510 is a chrome-free duplex corrosion protection coating that combines electroplated zinc and hex-chrome-free passivation with a chrome-free aluminum-rich organic topcoat. Engineered for use on fasteners, Magni 510 is typically applied to nuts, bolts, screws and other hardware.
Magni 511 - Fastener Coating
Magni 511 is a chrome-free duplex corrosion protection coating that combines an inorganic zinc-rich basecoat with an organic topcoat and is engineered for use on fasteners, including nuts, bolts and other hardware. Formulated with integrated friction modifiers to eliminate the need for sealers or post-coating lubricants, Magni 511 ensures repeatable torque/tension characteristics in assembly and is applied via dip-spin, dip-drain or spray application methods.
Magni 515 - Fastener Coating
Magni 515 is a chrome-free duplex corrosion protection coating that combines an inorganic zinc-rich basecoat with an aluminum-rich organic topcoat. Engineered for use on fasteners, including nuts, bolts, screws and other types of hardware, Magni 515 reduces processing steps, which, in turn, improves quality and reduces cost.
Magni 516 - Fastener Coating
Magni 516 is a chrome-free hybrid coating that combines electroplated zinc/nickel and hex-chrome-free passivated substrate with an aluminum-rich organic topcoat. A coating that can be engineered to specific coefficient-of-friction needs, Magni 516 is offered with exempt solvents and typically applied to fasteners, including nuts, bolts and other hardware. Magni 516 can be applied via dip-spin or spray application methods.
Magni 520 - Fastener Coating
Magni 520 is a chrome-free duplex coating that combines electroplated zinc and hex-chrome-free passivated substrate with an organic topcoat. Typically applied to externally threaded fasteners, stampings and other types of hardware, Magni 520 is engineered for use on parts exposed to high amounts of ultraviolet (UV) rays and other harsh outdoor elements. Magni 520’s two-coat system is applied via dip-spin or spray application methods and provides superior corrosion protection and cost-effectiveness.
Magni 525 - Fastener Coating
Magni 525 is a chrome-free duplex coating that combines an inorganic zinc-rich basecoat with an organic topcoat. Typically applied to externally threaded fasteners, stampings and other types of hardware, Magni 525 is engineered for use on parts exposed to high amounts of ultraviolet (UV) rays and other harsh outdoor elements. Magni 525’s two-coat system is applied via dip-spin or spray application methods and provides superior corrosion protection and cost-effectiveness.
Magni 556 - Fastener Coating
Magni 556 is a chrome-free fastener duplex coating system that combines an inorganic zinc-rich basecoat with an organic aluminum-rich friction-modified topcoat. The inorganic basecoat system is developed for superior heat-resistant corrosion performance and consistent in-process material stability. The organic topcoat system can be adjusted to meet OEM friction requirements while providing outstanding adhesion, heated loosening performance and chemical resistance. Magni 556 can be applied via dip-spin or spray application methods. Magni 556 is applied in three layers in dip-spin (two layers basecoat) and is used in the most corrosive automotive environments.
Magni 556E - Fastener Coating
Magni 556E is a chrome-free, duplex-coating fastener system that combines an inorganic zinc-rich basecoat with an organic aluminum-rich topcoat with friction values targeted specifically to meet various European OEM standards. The inorganic basecoat system is developed for superior heat-resistant corrosion performance and consistent in-process material stability. The organic topcoat is engineered to provide outstanding adhesion, heated-loosening, and chemical resistance qualities. Magni 556E can be applied using dip-spin or spray. In dipspin applications, Magni 556E is applied in three layers (two layers basecoat). Magni 556 is used in the most corrosive automotive environments.
Magni 560 - Fastener Coating
Magni 560 is a chrome-free duplex coating that combines electroplated zinc and hexchrome-free passivated substrate with an aluminum-rich organic topcoat. A coating that can be engineered to specific coefficient-of-friction needs, Magni 560 is offered with exempt solvents and typically applied to fasteners, including nuts, bolts and other hardware. Magni 560 can be applied via dip-spin or spray application methods.
Magni 561 - Fastener Coating
Magni 561 is a duplex coating that combines electroplated tin/zinc and hex-chromefree passivated substrate with an organic topcoat. A coating that can be engineered to specific coefficient-of-friction needs. Magni 561 is engineered for use on parts that interact with magnesium. Magni 561 is typically applied to fasteners, including nuts, bolts and other hardware. Magni 561 can be applied via dip-spin or spray application methods.
Magni 562 - Fastener Coating
Magni 562 is a chrome-free duplex coating that combines electroplated zinc nickle and hex-chrome-free passivated substrate with an aluminum-rich organic topcoat. A coating that can be engineered to specific coefficient-of-friction needs, Magni 562 is offered with exempt solvents and typically applied to fasteners, including nuts, bolts and other hardware. Magni 562 can be applied via dip-spin or spray application methods.
Magni 565 - Fastener Coating
Magni 565 is a chrome-free duplex coating that combines an inorganic zinc-rich basecoat with an aluminum-rich organic topcoat. Formulated as a two-coat system and resistant to automotive fuels and fluids, Magni 565 is the preferred fastener coating of leading global automotive manufacturers. It provides superior corrosion protection and cost-effectiveness and is typically applied to externally threaded fasteners, stampings and other hardware.
Magni 565 Black - Fastener Coating
Magni 565 Black is a chrome-free duplex coating that combines an inorganic zincrich basecoat with an aluminum-rich organic topcoat. Formulated as a two-coat system and resistant to automotive fuels and fluids, Magni 565 Black is the preferred fastener coating of leading global automotive manufacturers. It provides superior corrosion protection and cost-effectiveness and is typically applied to externally threaded fasteners, stampings and other hardware.
Magni 565 Blue - Fastener Coating
Magni 565 Blue is a chrome-free duplex coating that combines an inorganic zincrich basecoat with an aluminum-rich organic topcoat. Formulated as a two-coat system and resistant to automotive fuels and fluids, Magni 565 Blue is the preferred fastener coating of leading global automotive manufacturers. It provides superior corrosion protection and cost-effectiveness and is typically applied to externally threaded fasteners, stampings and other hardware.
Magni 567 - Fastener Coating
Magni 567 is a chrome-free coating engineered for use on fasteners, including nuts, bolts, screws and other hardware. Developed specifically to meet more stringent corrosion and friction performance requirements, Magni 567’s three-layer system – two basecoats, one topcoat – provides consistent coverage and chemical protection.
Magni 568 - Fastener Coating
Magni 568 is a chrome-free, zinc aluminum composite coating engineered for use on fasteners, including nuts, bolts, screws and other hardware. Developed specifically to meet the highest corrosion and friction performance requirements, Magni 568’s three-layer system – two basecoats, one topcoat – provides consistent coverage and chemical protection. This coating’s low cure temperature provides processing savings and allows coating to be applied on many parts and configurations that competitive offerings cannot coat due to excessively high cure temperatures.
Magni 569 - Fastener Coating
Magni 569 is a hex-chrome-free duplex coating that combines a plated zinc and non-hex chromate substrate with a durable Magni chrome-free organic topcoat. Engineered for use on fasteners, deck screws and other building hardware, Magni 569 provides superior product performance in fewer layers than comparable finishes.
Magni 570 - Fastener Coating
Magni 570 is a chrome-free duplex coating that combines electroplated zinc and hex-chrome-free passivated substrate with a black organic topcoat. A coating that can be engineered to specific coefficient of friction needs, Magni 570 is offered with exempt solvents and typically applied to fasteners, including nuts, bolts and other hardware. Magni 570 can be applied via dip-spin or spray application methods.
Magni 575 - Fastener Coating
Magni 575 is a chrome-free duplex coating that combines an inorganic zinc-rich basecoat with an organic topcoat. Engineered for use on fasteners, including nuts, bolts and other hardware, Magni 575 features a dark basecoat that provides sacrificial protection of steel and a black topcoat that creates a durable barrier.
Magni 577 - Fastener Coating
Magni 577 is a chrome-free, UV-stable coating that combines an inorganic zincrich basecoat with an organic topcoat. Engineered for use on fasteners, including nuts, bolts and other hardware, Magni 577 features a dark basecoat that provides sacrificial protection of steel and a high-gloss black topcoat that creates a durable barrier.
Magni 580 - Fastener Coating
Magni 580 is a chrome-free duplex coating that combines an inorganic dark gray zinc-rich basecoat with an organic topcoat. Typically applied to externally threaded fasteners, stampings and other types of hardware, Magni 580 is engineered for use on parts exposed to high amounts of ultraviolet (UV) rays and other harsh outdoor elements. Magni 580’s two-coat system is applied via dip-spin or spray application methods and provides superior corrosion protection and cost-effectiveness.
Magni 585 - Fastener Coating
Magni 585 is a duplex coating that combines an inorganic zinc-rich basecoat with various colored, organic, nonmetallic topcoats. Engineered for use on constanttension hose clamps, Magni 585 is the preferred coating of the world’s leading clamp manufacturers and is widely specified by leading global automakers.
Magni 590 - Fastener Coating
Magni 590 is a chrome-free duplex coating that combines an inorganic zinc-rich basecoat with an organic topcoat. Engineered for use on fasteners, including nuts, bolts, screws and other hardware, Magni 590 offers fewer processing steps, resulting in improved quality and reduced cost. Magni 590 is applied via dip-spin or spray application methods.
Magni 591 - Fastener Coating
Magni 591 is a duplex fastener coating that combines an inorganic zinc-rich basecoat with an organic topcoat. Engineered for use on fasteners, including nuts, bolts and other hardware, Magni 591 contains integrated friction modifiers and eliminates the need for sealers or post-coating lubricants; this ensures repeatable torque/tension characteristics in assembly. Magni 591 is applied via dip-spin, dipdrain or spray application methods.
Magni 594 - Fastener Coating
Magni 594 is a chrome-free duplex fastener coating that combines an inorganic zinc-rich basecoat with an aluminum-rich, friction-modified topcoat. Engineered for use on fasteners, including nuts, bolts, screws and other hardware, Magni 594 offers fewer processing steps, resulting in improved quality and reduced costs. Magni 594 can be applied via dip-spin or spray application methods.
Magni 595 - Fastener Coating
Magni 595 is an inorganic zinc/aluminum coating that employs heat-resistant resin chemistry for applications subjected to extreme temperatures that exceed the capability of conventional metallic coatings. Resistant to temperatures up to 1200° F, Magni 595 is engineered for use on fasteners and other components. Magni 595 contains integrated friction modifiers to eliminate the need for sealers or post-coating lubricants. It is most commonly applied via the dip-spin application method but can also be applied via dip-drain or spray methods.
Magni 597 - Fastener Coating
Magni 597 is an inorganic zinc/aluminum coating that employs heat-resistant resin chemistry for applications subjected to extreme temperatures that exceed the capability of conventional metallic coatings. Resistant to temperatures up to 1200° F, Magni 597 is engineered for use on fasteners and other components. Magni 597 contains integrated friction modifiers to eliminate the need for sealers or post-coating lubricants and helps eliminate the concern of seizing due to extreme temperatures. It is most commonly applied via the dip-spin application method but can also be applied via dip-drain or spray methods.
Fuel Pipe Coatings - 600 Series
Magni 659 - Fuel Filler Pipe Coating
Magni 659 is a chrome-free, highly conductive thermoset coating engineered for automotive fuel filler pipes fabricated with electroplated zinc-nickel. Formulated to provide 15 years of field service and excellent galvanic protection, Magni 659 is resistant to the corrosive effects of flexible fuel blends and stone impingement. Magni 659 is applied via dip-drain, dip-spin or spray application methods.
Browse by OEM Spec
AGCO
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| ACGO | 75100300 | Magni 501 | Fasteners | One coat to replace zinc plate | 240 | 8-10µ | Silver |
| AGCO | 75100300 | Magni 501 | Fasteners | For chemical resistance applications | 240 | 8-10µ | Silver |
Aisin
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Aisin | AESTH7702G-D (565) | Magni 565 | Threaded Fasteners, Stamping and other Hardware | Most Popular | 1000 | 5-7 µ topcoat, 8-10 µ basecoat | Silver/Grey |
| Aisin | AESTH7702G-DH (568 CC) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Most Popular | 1500 | 14-20µ | Silver |
| Aisin | AESTH7702G-DG (568 Black) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Most Popular | 1500 | 14-20µ | Black |
| Aisin | AESTH7702G-DM (568 LT) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Most Popular | 1500 | 14-20µ | Light Red |
AM General
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| AM General | TACOM12469117 | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Grey |
| AM General | TACOM12469117 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Grey |
Amonix
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Amonix | 90400026 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Grey |
Arvin Meritor
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Arvin Meritor | P91 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Grey |
ASTM
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| ASTM | F3125 | Magni 554 | Bolts | Durable Barrier | 720-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Silver |
| ASTM | A490 | Magni 554 | Bolts | Durable Barrier | 720-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Silver |
| ASTM | A490 | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver/Blue |
| ASTM | A325 | Magni 554 | Bolts | Durable Barrier | 720-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Silver |
| ASTM | A325 | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver/Blue |
| ASTM | F3125 | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver/Blue |
| ASTM | F2833 Grade I, F3125, A490, A325 | Magni 565 | Fasteners | Most Popular | 720 minimum | 8-10 µ basecoat, 6-8 µ topcoat | Silver/Gray |
| ASTM | F2833 Grade 2 | Magni 567 | Fasteners | Hi SS Auto Thin | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver, Green, silver/Gray, Green |
| ASTM | F2833 Grade 3 | Magni 575 | Bolts | Durable Barrier | 480-1000 | 8-10 µ basecoat, 6-8 µ topcoat | Black |
| ASTM | F2833 Grade 4 | Magni 594 | Bolts, Nuts | Friction-Modified Topcoat | 720-1000 | 8-10 µ basecoat, 6-8 µ topcoat | Silver |
Bada
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Bada | Magni 525 | Wheel weights | UV/Harsh Exposure | 1000 | 8-10 µ basecoat, 8-10 µ topcoat | Silver | |
| Bada | Magni 525 | Wheel weights | UV/Harsh Exposure | 1000 | 8-10 µ basecoat, 8-10 µ topcoat | Glossy light gray |
BAE Systems
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| BAE Systems | 300009 | Magni 565 | Fasteners | Most popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
BMW
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| BMW | GS90011 | Magni 265 | Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Silver/Black |
| BMW | GS90010 ZnS3 | Magni 594 | Bolts, nuts | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver |
Bobcat
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Bobcat | PS-106A | Magni 501 | Fasteners | One coat to replace zinc plate | 240 | 8µ min | Silver/Gray |
| Bobcat | PS-106A | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Bobcat | PS-106B | Magni 501 | Fasteners | For chemical resistance applications | 240 | 8µ min | Black |
| Bobcat | PS-106B | Magni 575 | Bolts | Durable Barrier | 480-1000 | 12-20 µ | Black |
Briggs and Stratton
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Briggs and Stratton | Magni 565 | Fasteners | Most popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Brose
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Brose | BN590295-106 | Magni 565 | Fasteners | Most popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Case New Holland
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Case New Holland | CNH-MAT0141Q | Magni 235 | Muffler, ATD | Withstands 500° C | 240 | 30-55 µ | Black |
| Case New Holland | CNH-MAT0141Q | Magni 236 | Muffler, ATD | Withstands 600° C | 240 | 30-55 µ | Black |
| Case New Holland | MAT0320, Type 2, Class A | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Case New Holland | MAT0320, Type 1, Class A | Magni 565 | Fasteners | Most Popular | 720-1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Caterpillar
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Caterpillar | 1E1675G | Magni 554 | Bolts | Next generation | 720-1000 | 5-7 µ topcoat, 7-9 µ basecoat | Silver |
| Caterpillar | 1E1675G | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 6-8 µ topcoat, 8-10 µ basecoat | Silver/Blue |
Cummins Engine
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Cummins Engine | 74058 | Magni 515 | Bolts, Nuts | Shiny Appearance | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Bright Silver |
| Cummins Engine | 74045 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Daihatsu
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Daihatsu | DTSH7702G-D (568) | Magni 565 | Threaded Fasteners, Stamping and other Hardware | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray | |
| Daihatsu | DTSH7702G-DG (568 Black) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | 1500 | 14-20µ | Light Red | |
| Daihatsu | DTSH7702G-DH (568 CC) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | 1500 | 14-20µ | Silver | |
| Daihatsu | DTSH7702G-DM (568 LT) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | 1500 | 14-20µ | Black |
Daimler-Benz
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Daimler-Benz | DBL 8440.20, DBL 8440.60 | Magni 265 | Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Silver/Black |
| Daimler-Benz | DBL 8440.60 | Magni 295 | Chassis / Underbody | Weight Savings, +Protect E-coat | 1500 | 10-20 µ, 15-25µ E-Coat | Silver |
| Daimler-Benz | DBL 8451.69 | Magni 510 | Bolts, Strikers | e/z Substrate | 1000 | 8-10 µ topcoat over 5-8 µ z/c | Bright Silver |
| Daimler-Benz | DBL 8451.69, DBL 8451.79 | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Daimler-Benz | DBL 8440.20.22 | Magni 565 | Fasteners | Most Popular | 960 hours | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Daimler-Benz | DBL 8440.21/.23/.31/.41 | Magni 575 | Bolts | 1000 | |||
| Daimler-Benz | DBL 9440.50 | Magni 575 | Bolts | 1000 | |||
| Daimler-Benz | DBL 8440 | Magni 585 | Clamps no black | POPP, Adhesion | 400-1500 | 12-20 µ | Light Gray, Dark Gray |
| Daimler-Benz | DBL 9440, 8440 | Magni 590 | Bolts, Screws | Economical | 480 | 12-20 µ | Silver |
| Daimler-Benz | DBL 9440, 8440 | Magni 591 | Bolts, Screws | Economical | 480 | 12-20 µ | Black |
| Daimler-Benz | DBL 9440.40, 8440.30 | Magni 594 | Bolts, Nuts | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver |
Delphi
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Delphi | DX550041 | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| Delphi | DX551810 | Magni 535 | Fasteners | Mitigates Gal. Corr. | 1000 | 5-8 µ topcoat over 8-10 µ basecoat | Silver |
| Delphi | DX 551250 | Magni 536 | Misc. | Metallic Pigments | 1000 | 8-10 µ basecoat, 5-8 µ topcoat | Silver |
| Delphi | DX551801, DX5501804 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Silver/Gray |
| Delphi | DX551803 | Magni 575 | Fasteners | Durable Barrier | 480-1000 | 12-20 µ | Black |
| Delphi | DX551802 | Magni 595 | Components | Extreme Temperatures | 400-1000 | 8-10 µ topcoat over 15-18 µ basecoat | Gray |
Denso
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Denso | DDS6700-008 DF3-BT | Magni 565 | Fasteners | Most Popular | 1000 | 14-20 µ | Silver/Grey |
| Denso | DDS6700-008 DF4-BT | Magni 568 | Fasteners | Most Popular | 1500 | 14-20 µ | Silver/Grey |
Domestic
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Domestic | 12-67 E2 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Grey |
FCA
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| FCA | 10783 | Magni 109 | Rotors | Thin | 400 | 15-20 µ | Silver/Grey |
| FCA | PS-9295 | Magni 118 | Calipers | 1000 | 10-15 µ | Variety of colors | |
| FCA | MS-10783 | Magni 140 | Rotors | Thin | 240 | 25 µ | Gray |
| FCA | MS PF-7-1(C) | Magni 234 | Mufflers | Stainless Steel | 240 | 30-55 µ | Black |
| FCA | MS PF-7-1(D) | Magni 235 | Muffler, ATD | Withstands 500° C | 240 | 30-55 µ | Black |
| FCA | MS PF-7-1 (E) | Magni 236 | Muffler, ATD | Withstands 600° C | 240 | 30-55 µ | Black |
| FCA | TBD | Magni 336 | Fuel Tanks | High Thermoset | 8-10 µ | Silver/Gray | |
| FCA | PS-8688 AZ | Magni 494 | Brake and power steering lines | High SS and chem resistance | 1000 | 6-8µ | Silver |
| FCA | PS-1409 | Magni 504 | Bolts, Nuts | Low Friction | NA | 8-10 µ | Black, Dark Gray, Blue |
| FCA | PS-9295 | Magni 510 | Bolts, Strikers | Shiny appearance | 1000 | 8-10 µ topcoat over 5-8 µ z/c | Bright Silver |
| FCA | PS-7626 | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| FCA | 9.57513 | Magni 554 | Fasteners | Durable Barrier | 480-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Black |
| FCA | PS-11036 (type 2) | Magni 554 | Bolts | Durable Barrier | 720-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Silver |
| FCA | PS-11036 (Type 3) | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver/Blue |
| FCA | PS-9295 | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| FCA | PS-13285 | Magni 561 | Fasteners, Stamping and other Hardware | Galvantic corrosion protection against magnesium | 1000 | 8-10 µ topcoat, 6-10 µ tin/zinc plate basecoat | Silver/Black |
| FCA | PS-9295 | Magni 562 | Nuts, Bolts, Screws and other Hardware | 1500 Hours | 5 – 8 µm topcoat over 6 – 10 µm basecoat | Silver/Gray | |
| FCA | PS-10633, PS-10378 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Silver/Gray |
| FCA | PS-9666 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Silver/Gray/Pink |
| FCA | PS-11036 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Black |
| FCA | PS-9666 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Black |
| FCA | 9.57513/Type IV | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| FCA | PS-9295 | Magni 570 | Fasteners, Stamping and other Hardware | 1000 | 8-10 µ topcoat, 5-8 µ plated basecoat | Black | |
| FCA | PS-10378; 9.57513 | Magni 575 | Bolts | Durable Barrier | 480-1000 | 12-20 µ | Black |
| FCA | PS-10378 | Magni 577 | Bolts, Nuts | High-Gloss Style | 480-1000 | 12-20 µ | Glossy Black |
| FCA | PS-7626 | Magni 585 | Clamps | POPP, adhesion | 400-1500 | 12-20 µ | Black, Light Gray, Dark Gray |
| FCA | 9.57513 (Type IV and V) | Magni 590 | Bolts, Screws | Economical | 480 | 12-20 µ | Silver |
| FCA | 9.57513 (Type IV and V Black) | Magni 591 | Bolts, Screws | Economical | 480 | 12-20 µ | Black |
| FCA | PS-11036, 9.57513 | Magni 594 | Bolts, Nuts | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver |
| FCA | PS-9163 Category II | Magni 659 | Fuel Pipes | Fuel Resistant | 1000 | 15µ min | Black |
| FCA | 9.02144 | Magni 659 | Fuel Pipes | Fuel Resistant | 1000 | 15µ min | Black |
Fiat
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Fiat | TBD | Magni 336 | Fuel Tanks | High Thermoset | 8-10 µ | Silver/Grey |
Fisher Valve
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Fisher Valve | FFS6B1 — NCF1 | Magni 567 | Fasteners | Hi SS Auto Thin | 1500 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray, Green |
| Fisher Valve | FFS6B1 — NCF3 | Magni 536 | Misc. | Zinc Plate | 1000 | 8-10 µ basecoat, 5-8 µ topcoat | Silver |
Ford Motor Co.
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Ford Motor Co | WSS-M2P170-B2 | Magni 111 | Rotors & Drums | Air-dry | 240 | 55-70 µ | Black |
| Ford Motor Co | WSS-M21-P40-A1 | Magni 118 | Calipers | 1000 | 12 µ | Variety of colors | |
| Ford Motor Co | WSS-M2P170-B2 | Magni 140 | Rotors | Thin | 240 | 40 µ min | Gray |
| Ford Motor Co | WSA-M2P170-A2, B4 | Magni 234 | Mufflers | Stainless Steel | 240 | 30-55 µ | Black |
| Ford Motor Co | WSS-M2P170-B4, B7 | Magni 235 | Muffler, ATD | Withstands 500° C | 240 | 30-55 µ | Black |
| Ford Motor Co | WSS-M2P170-B4, B6, B7 | Magni 236 | Muffler, ATD | Withstands 600° C | 240 | 30-55 µ | Black |
| Ford Motor Co | WSS-M2P177-C3 | Magni 265 | Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Silver/Black |
| Ford Motor Co | WSS-M2P177-C3 | Magni 295 | Chassis / Underbody | Weight Savings, +Protect E-coat | 1500 | 10-20 µ, 15-25µ E-Coat | Silver |
| Ford Motor Co | WSS-M1A325-B1,WSL-M7C91-A | Magni 336 | Fuel Tanks | High Thermoset | 2000 | 8-10 µ | Silver/Gray |
| Ford Motor Co | WSA-M21P26-A | Magni 494 | Brake and power steering lines | High SS and chem resistance | 3000 | 6-8µ | Silver |
| Ford Motor Co | WSS-M21P33-A | Magni 504 | Bolts, Nuts | Low Friction | NA | 8-10 µ | Black, Dark Gray, Blue |
| Ford Motor Co | WSD-M2P10-B2 | Magni 507 | Bolts, Nuts | Industrial Black | 480 | 8-10 µ topcoat over 5-8 µ | Black |
| Ford Motor Co | WSS-M21P37-A3 | Magni 510 | Bolts, Strikers | e/z Substrate | 1000 | 8-10 µ topcoat over 5-8 µ z/c | Bright Silver |
| Ford Motor Co | WSD-M21P11-B1, WSS-M21P37-A2 (S441) | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| Ford Motor Co | WSS-M21P37-A3 | Magni 515 | Bolts, Nuts | Fewer Layers | 1000 | 5-8 µ topcoat over 8-10 µ basecoat | Bright Silver |
| Ford Motor Co | ESE-MP13P6-B2 | Magni 540 | Door Strikers | 840 | 8-10 µ basecoat, 5-8 µ topcoat | Black | |
| Ford Motor Co | WSS-M21P40-A1/A2 (S440) | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Ford Motor Co | WSS-M21P37-A3 (S439 Black) | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black |
| Ford Motor Co | WSS-M21P37-A1 (S439 Silver) | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Ford Motor Co | WSS-M21P45 A1-A2 | Magni 585 | Clamps | POPP, Adhesion | 400-1500 | 12-20 µ | Black, Light Gray, Dark Gray |
| Ford Motor Co | WSD-M21P11-B1 | Magni 590 | Bolts, Screws | Economical | 480 | 12-20 µ | Silver |
| Ford Motor Co | WSA-M2P170-A3 | Magni 595 | Components | Extreme Temperatures | 8-10 µ topcoat over 15-18 µ basecoat | Gray | |
| Ford Motor Co | WSS-M2P170-B5/B6 | Magni 597 | Components | Anti-seizing properties after heat exposure, expensive topcoat | 500-1000 | 5-8 µ topcoat over 15-18 µ basecoat | Gray |
| Ford Motor Co | WSS-M2P192-A1 | Magni 659 | Fuel Pipes | Fuel Resistant | 1000 | 15µ | Black |
Gamesa
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Gamesa | GTS16016 | Magni 565 | Fasteners | Heat Soak 150 C 3 hours | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
General Electric
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| General Electric | E00C12200 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| General Electric | TS00001901 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Silver/Gray |
| General Electric | F69A4 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ plated basecoat | Silver/Gray |
General Motors
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| General Motors | GM 273M, GMW 16284 | Magni 109 | Rotors | Thin | 400 | 15-20 µ | Silver/Gray |
| General Motors | GMW 4707 | Magni 118 | Calipers | 1000 | 12 µ | Variety of colors | |
| General Motors | GMW 16284 | Magni 140 | Rotors | Thin | 240 | 25 µ | Gray |
| General Motors | 9984299, GMW 15196 | Magni 234 | Mufflers | Stainless Steel | 240 | 30-55 µ | Black |
| General Motors | GMW 15196 | Magni 235 | Muffler, ATD | Withstands 500° C | 240 | 30-55 µ | Black |
| General Motors | GMW 14671 Type H | Magni 265 | Underbody Stamping or Other Structure | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Silver/Black |
| General Motors | GMW 14671 Type H | Magni 295 | E-coat | Weight Savings, +Protect E-coat | 1500 | 10-20 µ, 15-25µ E-Coat | Silver |
| General Motors | GMW 17334 | Magni 494 | Brake and power steering lines | High SS and chem resistance | 1000 | 6-8µ | Silver |
| General Motors | GMW 16431 | Magni 504 | Bolts, Nuts | Exhaust Fasteners | 8-10 µ | Black, Dark Gray, Blue | |
| General Motors | GM 7111M, GMW 14100 | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| General Motors | GMW 4707, GMW 7113M | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| General Motors | GMW 3359 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| General Motors | GMW 4707 | Magni 570 | Fasteners, Stamping and other Hardware | 1000 | 8-10 µ topcoat, 5-8 µ plated basecoat | Black | |
| General Motors | GMW 3359 | Magni 575 | Fasteners | Durable Barrier | 480-1000 | 12-20 µ | Black |
| General Motors | GMW 4205 | Magni 577 | Bolts, Nuts | High-Gloss Style | 480-1000 | 12-20 µ | Glossy Black |
| General Motors | GMW 14083 | Magni 585 | Clamps | POPP, Adhesion | 400-1500 | 12-20 µ | Black, Light Gray, Dark Gray |
| General Motors | GMW 14C-PT, GMW 00255-F | Magni 590 | Bolts, Screws | Economical | 480 | 12-20 µ | Silver |
| General Motors | GMW 14C-PT, GMW 00255-F | Magni 591 | Bolts, Screws | Economical | 480 | 12-20 µ | Black |
| General Motors | GMW 15197 | Magni 659 | Fuel Pipes | Fuel Resistant | 1000 | 15µ min | Black |
Genie Terex
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Genie Terex | GES 1326 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Genie Terex | GES 1326 | Magni 594 | Bolts, Nuts | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver |
Hendrickson
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Hendrickson | 26408-H9 | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
Hino
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Hino | HTSH7702G-DH (568 CC) | Magni 568 | Fasteners | 1500 | 14-20 µ | Silver | |
| Hino | HTSH7702G-DM (568 LT) | Magni 568 | Fasteners | 1500 | 14-20 µ |
Light Red |
|
| Hino | HTSH7702G-DG (568 Black) | Magni 568 | Fasteners | 1500 | 14-20 µ | Black |
Honda
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Honda | HES D2021-Class 1 Grade 1 | Magni 112 | Rotors | Water-Reducible | 48 min | 50 µ | Black |
| Honda | HES D2021 | Magni 190 | Rotors & Drums | Low Cure | 400 | 12-15 µ | Silver |
| Honda | HES D2008-1 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Honda | 5110Z-T5AAA-0000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Common on stampings. Class 2 has higher coating weight, no SS req'ts, but 60 cycles | 1500 Class 1 | 12-18 µ | Silver |
| Honda | HES D2008-2C, 9000Z-T2AA-A000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Honda's low friction option. | 1500 | 12-18 µ | Light Red |
| Honda | HES D2008, 5110Z-T5AA-0000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Honda's low friction option. Light red color. Class 2 has higher coating wgts, no SS but 60 cycles | 1500 Class 1 | 12-18 µ | Light Red |
| Honda | HES D2008-2B, 9000Z-T2AA-A000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Honda's high friction option. | 1500 | 12-18 µ | Light Blue |
| Honda | HES D2008, 5110Z-T5AA-0000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Class 2 has higher coating weight; no SS reqt's but 60 cycles | 1500 Class 1 | 12-18 µ | Light Blue |
| Honda | HES D2008-2A, 9000Z-T2AA-A000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | OK to use regular B18 on stampings | 1500 | 12-18 µ | Gray |
| Honda | HES 2008, 5110-T5AA-0000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Honda's Black option. Class 2 has no SS req'ts but 60 cycles | 1500 Class 1 | 12-18 µ | Black |
| Honda | HES D2008-2D, 9000Z-T2AA-A000 | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Honda Black option | 1500 | 12-18 µ | Black |
Hyundai
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Hyundai | MS 619-07 | Magni 130 | Rotors | Water-based; high hardness | 240 | 50-75 µ | Black |
ISO
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| ISO | 10683 | Magni 554 | Bolts | 720-1000 | 7-9 µ basecoat, 5-7 µ topcoat | Silver | |
| ISO | 10683 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Jaguar Landrover
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Jaguar LandRover | STJLR.50.5048-A1 | Magni 560 | Fasteners | Passivated Substrate | 840 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Jaguar LandRover | STJLR.50.5043-A1, LRES.21.ZS.05 | Magni 565 | Fasteners | Most Popular | 840 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Jaguar LandRover | STJLR.50.5043-A3 | Magni 567 | Fasteners | Hi SS Auto, Thin | 1500 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray, Green |
JCB
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| JCB | STD 00017 | Magni 565 | Fasteners | Most Popular | 720 Minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
JLG Industries
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| JLG Industries | 4150701 | Magni 565 | Fasteners | Most Popular | 720 Minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
John Deere
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| John Deere | JDM F14 | Magni 235 | Muffler, ATD | Withstands 500° C | 240 | 30-55 µ | Black |
| John Deere | JDM F14 | Magni 236 | Muffler, ATD | Withstands 600° C | 240 | 30-55 µ | Black |
| John Deere | JDM F13 A,D, and G | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| John Deere | JDM F13 C,F, and J | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| John Deere | JDM F13 B,E, and H | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| John Deere | JDM F13 A2,D2, and G2 | Magni 575 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black |
| John Deere | JDM F13C2, F2 and J2 | Magni 575 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black |
| John Deere | JDM F25 | Magni 575 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black |
| John Deere | JDM F13 B2, E2, and H2 | Magni 575 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black |
Lennox
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Lennox International | ES 0288 | Magni 520 | Threaded Fasteners, Stamping and other Hardware | Friction Modifiers | 1000 | 5-8 µ topcoat over 8-10 µ basecoat | Variety of colors |
| Lennox International | ES 0288 | Magni 525 | Fasteners | UV/Harsh Exposure | 1000 | 8 – 10µm topcoat, 8 -10µm basecoat | Glossy light gray |
| Lennox International | ES 0288 | Magni 525 | Fasteners | UV/Harsh Exposure | 1000 | 8 – 10µm topcoat, 8 -10µm basecoat | Glossy dark gray |
| Lennox International | ES 0288 | Magni 525 | Fasteners | UV/Harsh Exposure | 1000 | 8 – 10µm topcoat, 8 -10µm basecoat | Glossy multiple colors |
| Lennox International | ES 0288 | Magni 525 | Fasteners | UV/Harsh Exposure | 1000 | 8 – 10µm topcoat, 8 -10µm basecoat | Glossy light blue |
Manitowoc
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Manitowoc | 6829104440 | Magni 594 | Bolts, Nuts | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver |
Murcury Marine
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Mercury Marine | 8M0057329 | Magni 567 | Fasteners | Hi SS Auto, Thin | 1500 | 5-8 µ topcoat, 8-10 µ basecoat |
Silver/Gray, Green |
Meritor
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Meritor | P55 | Magni 109 | Rotors | Thin | 400 | 15-20 µ | Silver/Gray |
| Meritor | P92 | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat |
Silver |
| Meritor | P91 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat |
Silver/Gray |
Mitsubishi
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Mitsubishi | Magni 130 | Rotors | Water-based; high hardness | 240 | 50-75 µ | Black |
MTD
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| MTD | 87 | Magni 575 | Bolts | Durable Barrier | 480-1000 | 12-20 µ | Black |
Navistar
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Navistar | TMS-4518, Type II | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| Navistar | TMS-4518, Type I | Magni 565 | Fasteners | Most Popular | 720-1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Nissan
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Nissan | NES M4601 | Magni 109 | Rotors | Thin | 400 | 15-20 µ | Silver/Gray |
| Nissan | NES M5083 | Magni 111 | Rotors & Drums | Air-dry | 72 | 35 min (depending on surface roughness) | Black |
| Nissan | NES M4601 | Magni 565 | Fasteners | Most Popular | 1000 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Nissan | NES M4601 | Magni 567R | Fasteners | Hi SS Auto, Thin | 1500 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray, Green |
| Nissan | NES M4601 | Magni 585 | Clamps | POPP, Adhesion | 400-1500 | 12-20 µ | Black, Light Gray, Dark Gray |
Oshkosh Corp.
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Oshkosh Corp. | D60 | Magni 575 | Bolts | Durable Barrier | 480-1000 | 12-20 µ | Black |
PACCAR
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| PACCAR | CS0059 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Parker Hydraulics
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Parker Hydraulics | PS-623 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Pink/purple |
Porsche
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Porsche | PTL 7529 | Magni 265 | Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Silver/Black |
| Porsche | PTL 7529 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
PSA
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| PSA | S84 4107 | Magni 140 | Rotors | Thin | 250 | 35 µ min | Gray |
| PSA | B15 33 20 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Renault
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Renault | 31-03-075 | Magni 105 | Disc & Drums | Water-based; Silver | 144 | 15-20 µ | Silver |
| Renault | TBD | Magni 336 | Fuel Tanks | High Thermoset | 8-10 µ | Silver/Gray | |
| Renault | 01-71-002 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Renault Trucks
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Renault Trucks | 01.71.4002 | Magni 565 | Fasteners | Most Popular | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Reyher
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Reyher | REY026_0 2017_01 | Magni 565 | Fasteners | Most Popular | 720-1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Rivian
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Rivian | M565 | Magni 565 | Fasteners | Most Popular | 720 Min | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Senvion
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Senvion | Z-6.2-TS.00.99-B | Magni 565 | Fasteners | Most Popular | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Siemens AG
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Siemens AG | A6Z000 | Magni 520 | Threaded Fasteners, Stamping and other Hardware | Friction Modifiers | 720-1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver |
Subaru
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Subaru | Magni 130 | Rotors | Water-based; high hardness | 240 | 50-75 µ | Black | |
| Subaru | TS430-09-012 | Magni 565 | Threaded Fasteners, Stamping and other Hardware | Better galvanic performance vs competition | 1000 hours | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Subaru | TS430-09-012 | Magni 565 | Threaded Fasteners, Stamping and other Hardware | Better galvanic performance vs competition | 1000 hours | 5-8 µ topcoat, 8-10 µ basecoat | Black |
Suzuki
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Suzuki | SES D2204 | Magni 515 | Bolt, Nuts | 1000 | 5-8 µ topcoat over 8-10 µ basecoat | Bright Silver |
Tesla Motors
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Tesla Motors | TM-0010F-M | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Toro
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Toro | DS-920 | Magni 575 | Bolts | Durable Barrier | 480-1000 | 12-20 µ | Black |
Toyota
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Toyota | TSH 3128G | Magni 130 | Rotors | Water-based; high hardness | 240 | 50-75 µ | Black |
| Toyota | TSH 7702G-D (Magni 565) | Magni 565 | Threaded Fasteners, Stamping and other Hardware | Most Popular | 1000 | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Grey |
| Toyota | TSH7702G-DH (Magni 568 CC) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Toyota high-friction option | 1500 | 14-20 µ | Silver |
| Toyota | TSH7702G-DM (Magni 568 LT) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Toyota low-friction option | 1500 | 14-20 µ |
Light Red |
| Toyota | TSH7702G-DG (Magni 568 Black) | Magni 568 | Threaded Fasteners, Stamping and other Hardware | Toyota black option | 1500 | 14-20 µ | Black |
Trane
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Trane | S 3201063A1 | Magni 565 | Fasteners | Colormatched hex-chrome containing | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Trane | S 3201063A1 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Trane | S 3201063A1 | Magni 565 | Fasteners | Colormatched non-chrome | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
TRW
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| TRW | TS 2-25-60, Class B | Magni 511 | Fasteners | Friction Modifiers | 480 | 5-7 µ topcoat over 7-9 µ basecoat | Silver |
| TRW | TS 2-25-60, Class A | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
US Army TACOM
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| US Army TACOM | 12469117 | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| US Army TACOM | 12469117 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat |
Silver/Gray |
Vestas
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Vestas | 900182 | Magni 590 | Bolts, Screws | Economical | 720 | 12-20 µ | Silver |
Volkswagen
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Volkswagen | TL233 Ofl-t350 | Magni 580 | Threaded Fasteners, Stamping and other Hardware | UV resistant | 1000hrs | 7-9 µ topcoat, 8-10 µ basecoat | Black |
| Volkswagen | TL193 (Pending) | Magni 105 | Brake Discs and Drums | Water-based, silver | 240 | 30-40 µ | Silver |
| Volkswagen | TL165 (pending) | Magni 107 | Brake Discs and Drums | Water-based, black | 240 | 30-40 µ | Black |
| Volkswagen | TL 260 | Magni 111 | Rotors & Drums | Air-dry | 240 | 55-70 µ | Black |
| Volkswagen | TL 233 Ofl-t350 | Magni 265 | Chassis / Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Black |
| Volkswagen | TL 233 Ofl-t650 | Magni 265 | Chassis / Underbody | Lightweight ~HDG | 2000 | 10-15 µ topcoat, 10-15 µ basecoat | Black |
| Volkswagen | TL245 Ofl-t647 | Magni 556 | Threaded Fasteners, Stamping and other Hardware | Durable Barrier | 1500 | 8-10 µ basecoat, 6-8 µ topcoat | Silver |
| Volkswagen | C 641(TL 217),C 347 (TL217/black) | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Volkswagen | TL233 Ofl-t330 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Black/other |
| Volkswagen | TL245 Ofl-t602 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver |
| Volkswagen | TL245 Ofl-t611 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver |
| Volkswagen | TL245 Ofl-t615 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver |
| Volkswagen | TL 233 Ofl-t330 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
| Volkswagen | C 347 (TL 217 black) | Magni 570 | Fasteners, Stamping and other Hardware | 1000 | 8-10 µ topcoat, 5-8 µ plated basecoat | Black | |
| Volkswagen | TL 233 Ofl-t630 | Magni 575 | Bolts, Nuts no threaded parts | Friction-Modified Topcoat | 480-1000 | 12-20 µ | Black |
| Volkswagen | TL 134, TL 233 | Magni 585 | Clamps | POPP, Adhesion | 400-1500 | 12-20 µ | Black, Light Gray, Dark Gray |
| Volkswagen | TL245 Ofl-t647, TL233 Ofl-t630 | Magni 594 | Threaded Fasteners, Stamping and other Hardware | Friction-Modified Topcoat | 720-1000 | 12-20 µ | Silver/Gray |
Volvo
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Volvo | VCS 5737, 29 | Magni 560 | Fasteners | Passivated Substrate | 1000 | 5-8 µ topcoat, 6-10 µ basecoat | Silver/Gray |
| Volvo | VCS 5737. 29, .19 | Magni 565 | Fasteners | Most Popular | 720 minimum | 5-8 µ topcoat, 8-10 µ basecoat | Silver/Gray |
Webb Wheel
| OEM | Specification | Magni Coating | Parts | Unique Benefit | Salt Spray (Hours) | Thickness | Color |
| Webb Wheel | ES-210 | Magni 109 | Rotors | Thin | 400 | 15-20 µ | Silver/Gray |